Browse Our Catalog

Safety Clips - Page 3 - Extreame Savings! Save up to 48%


Extreame Savings! Up to 48% off on Safety Clips at Edmonton Csse, Page 3. Top brands include Guardian Fall Protection, Peakworks, FallTech, ProClimb, Gear Keeper, Fusion, Ergodyne, Malta Dynamics, Honeywell, Spidergard, & KwikSafety. Hurry! Limited time offers. Offers valid only while supplies last.



Guardian Fall Protection 01823 ANSI High Strength Rebar Hook
By Guardian Fall Protection
In Stock
$28.04

mpn: 01823, ean: 0672421018232,

4.0 out of 5 stars with 22 reviews
The Guardian Fall Protection ''Rebar Hook'' is easy to use and designed for one hand operation. This product is primarily used to securely attach lanyards or lifelines to anchorages. This product offers a maximum strength up to 5,000 pounds and has a 2 3/8 inch gate.Easy to use one hand operation. Securely attach lanyards or lifelines to anchorages. Offer maximum strength to 5,000 pounds. ANSI Compliant High Strength. 2 3/8 inch gate.


Peakworks Fall Protection V8229100 Industrial/Construction Reusable Roof Anchor Bracket, Hinged, OSHA/ANSI Compliant, Temporary, Red (Anchor Screws Sold Seperately)
By Peakworks
In Stock
$14.62

mpn: V8229100, ean: 0626053551636,

4.0 out of 5 stars with 62 reviews
A complete fall arrest system requires three primary components; approved full Body harness, connector, and anchorage connector. Peakworks anchorage connectors are made of high quality materials that allow them to meet the most recent ANSI, CSA and OSHA requirements.Meets ANSI Z359.18, CSA Z259.15 and OSHA requirements. Reusable roof anchor bracket - Use screw size: 3'' x #10 ( 32 screws / 16 per side ). Built with a minimum tensile strength of 5,000 lbs; 310-lb capacity ( 1 worker ). Used


Guardian Fall Protection 10715 4-Foot Loop and D-Ring End Concrete Anchor Strap with Protective Sheathing
By Guardian Fall Protection
In Stock
$13.85
$7.42
You Save: 46%

mpn: 10715, ean: 0672421107158,

4.4 out of 5 stars with 46 reviews
Guardian Fall Protection 4' Loop & D-ring w/ Protective Sheathing (10715)4-feet in length. Inexpensive anchor solution. Disposable and intended for one time use only. Make sure that your anchor strap is attached to a structure capable of supporting 5,000 pounds. Sheathed in heavy duty nylon webbing.


FallTech 7336 Pass-Thru Web Anchor Sling, 3-Foot
By FallTech
In Stock
$25.88
$25.48
You Save: 2%

mpn: 7336, ean: 0084298733604,

4.6 out of 5 stars with 72 reviews
3ft. pass-thru anchor sling is constructed using heavy-duty 1 3/4in. polyester webbing sewn on to a 3in. wear pad. Uses on standard D-ring for connection to deceleration device and one large D-ring for pass-through/wrap around cinching. U.S.A.Heavy-duty 1-3/4-inch polyester webbing with rugged forged alloy-steel hardware. 3-Inch wear pad protects primary webbing from cuts and abrasion. Ideal for I-Beams and other properly rated structural members. Rated at over 5,000 pounds. Meets the


ProClimb USR-04-C09B Twist Lock Steel Scaffold Hook, 222.1 mm x 142.5 mm
By ProClimb
In Stock
$36.21
$35.99

mpn: USR-04-C09B,

4.4 out of 5 stars with 91 reviews
This Scaffold Hook meets the safety requirements of: ANSI Z359.12-2007/ANSI Z359.12-2009, CSA Z259.12, EN 362. It has a minimum Breaking Strength of 50 kN/11,240 lb.ANSI Z359.12-2007/Z359.12-2009 Double Action/Self Locking Gate 16 kN/3,600 lb Zinc Plate Finish. Gate Opening: 54 mm, A: 245 mm/B: 142.5 mm. Minimum Breaking Strength: 50 kN/11,240 lb.


Gear Keeper RT3-7524 Retractable Instrument Tether with Stainless Steel Rotating Belt Clip, 80 lbs Breaking Strength, 24 oz Force, 32" Extension
By Gear Keeper
In Stock
$29.99
$26.64
You Save: 11%

mpn: RT3-7524, ean: 0653096375240,

4.1 out of 5 stars with 123 reviews
Gear Keeper retractable instrument tether with rotating belt clip. Includes barrel-lock lanyard and 1-inches split ring. This retractable instrument tether secures your instrument, preventing loss and damage while allowing easy extension. Designed for heavy instruments. RT3 Series with two QC-II accessories included. Locking mechanism. Rotating belt clip mount attaches to pants or belts up to 2-inches. Rotates 360 degrees. 80 lbs breaking strength. Impact-resistance plastic case. Saltwater


Gear Keeper RT3-4548 Retractable Instrument Tether with Aluminum Carabiner, 80 lbs Breaking Strength, 48 oz Force, 22" Extension
By Gear Keeper
In Stock
$54.99
$45.76
You Save: 17%

mpn: RT3-4548, ean: 0653096345489,

4.6 out of 5 stars with 85 reviews
Gear Keeper retractable instrument tethers with aluminum carabiner mount, aluminum carabiner attachment. These retractable instrument tethers secures your heavy instrument, preventing loss and damage while allowing easy extension. Designed for very heavy instruments. RT3 Series with two QC-II accessories included. Carabiner attaches D-ring or belt loop. Carabiner attaches to instrument. Nylon/Kevlar line. Stainless steel spring and hardware. Impact-resistance plastic case. Saltwater proof.


Fusion Climb Maxi-2 Forged Carbon Steel Fall Safety Climbing Carabiner Snap Hook Black
By Fusion
In Stock
$14.68

mpn: FP-6013-3-BLK, ean: 0635409063846,

4.4 out of 5 stars with 27 reviews
Fusion Climb Maxi-2 Forged Carbon Steel Fall Safety Climbing Carabiner Snap Hook Black - Forged Snap Hook. 1'' Gate Opening. - This strong, drop forged, double locking snaphook is made of carbon steel. - It is ideal for all industrial, climbing gym and ropes course applications. - Meets ANSI Z359.1 standards. - MBS: 25 KnIndustrial applications. Double-locking, Stainless steel gate. True captive eye. Carbon steel construction. MBS: 25Kn.


Guardian Fall Protection 241 Swivel Anchor Bolt
By Guardian Fall Protection
In Stock
$52.13
$42.08
You Save: 19%

mpn: 00241, ean: 0672421002415,

4.5 out of 5 stars with 149 reviews
The Guardian Fall Protection ''Concrete Swivel Anchor'' is a secure anchor point rated at 5,000 pounds, swivels 360 degrees and meets all applicable OSHA and ANSI standards. This product is perfectly suited for temporary or permanent applications. The reusable D-Ring assembly only requires you to install a new bolt. The anchor is composed of high strength plated steel and stainless steel makes the anchor capable of working in a wide variety of punishing environments. Anchor includes a visual


FallTech 7427 Cable Pass-Thru Anchor Sling, 4-Foot
By FallTech
In Stock
$71.09

mpn: 7427, ean: 0084298742705,

4.8 out of 5 stars with 132 reviews
Built to meet the site-specific needs of various industries, FallTech multi-purpose anchors are designed for a wide variety of temporary and permanent applications. We know that the stakes are high. And, when it comes to worker safety, there are no second chances. That is why. Fall Protection is all we do. And we take it seriously. Advanced technical design and rigorous quality testing are the backbone of FallTech's manufacturing process. We train and staff fall protection experts that


Guardian Fall Protection 10452 6-Foot Vinyl Coated Galvanized Cable Choker Anchor with 2-1/2-Inch and 3-Inch Ends
By Guardian Fall Protection
In Stock
$37.47

mpn: 10452, ean: 0672421104522,

4.3 out of 5 stars with 34 reviews
FEATURES:• Galvanized steel 5/16'' wire• Used by looping around a beam or anchorage and connecting ends using a carabiner• Durable and easy to use• Vinyl coated to protect anchorage surfacesThe Guardian Fall Protection galvanized steel 5/16'' wire ''Cable Anchorage Slings'' are used by looping around a beam or anchorage and connecting ends using a carabiner. This convenient anchor point is durable and easy to use. The cable is vinyl coated to protect anchorage surfaces. End point


Guardian Fall Protection 00600 CB-1-B Bolt-On Wall Anchor 6-Inch by 6-Inch
By Guardian Fall Protection
In Stock
$94.48
$86.25
You Save: 9%

mpn: 00600, ean: 0672421006000,

4.1 out of 5 stars with 41 reviews
FEATURES:• Permanent or temporary anchor point• Can facilitate a horizontal lifeline system• Powder coated for corrosion protection• Forged steel D-ring• 6 Inch by 6 Inch backer plateThe Guardian Fall Protection ''CB-1-B'' is a 6 inch by 6 inch bolt-on concrete permanent or temporary anchor point. This particular anchor can be used as part of a horizontal lifeline system and is powder coated for corrosion protection. The backer plate is capable of withstanding a 5,000 pound capacity.


Squids 3116 Pull-On Wrist Tool Lanyard with Buckle Connection, 3 Pounds
By Ergodyne
In Stock
$10.95

mpn: 19057, ean: 0720476190578,

4.7 out of 5 stars with 79 reviews
Pull-On Wrist Tool Lanyard with Buckle: Offers connection points to Tool Tails for safe and easy tethering to help prevent dropped objects.One size fits all pull-on design is easy to take on and off. Elastic maintains a snug fit. Modular quick connecting buckle for exchanging multiple tools. Compatible with 3103: Detachable Lanyard Loops. Tether length 17.5'' (44cm). Maximum safe working capacity: 3 lbs. (1.4 kg). Third party tested using a 2:1 safety factor.


Guardian Fall Protection 10472 6-Foot Vinyl Coated Galvanized Cable Choker Anchor with Snaphook Ends
By Guardian Fall Protection
In Stock
$49.01

mpn: 10472, ean: 0672421104720,

4.2 out of 5 stars with 90 reviews
Guardian Fall Protection 6' Vinyl Coated Galvanized Cable Choker w/ Snap Hook ends (10472)Galvanized steel 5/16-Inch wire. Used by looping around a beam or anchorage and connecting ends using a carabineer. Durable and easy to use. Vinyl coated to protect anchorage surfaces. Snaphook ends.


Gear Keeper RT3-7526 Retractable Instrument Tether with Stainless Steel Rotating Belt Clip, 80 lbs Breaking Strength, 26 oz Force, 28" Extension
By Gear Keeper
In Stock
$29.99

mpn: RT3-7526, ean: 0653096375264,

4.4 out of 5 stars with 93 reviews
Gear Keeper retractable instrument tether with rotating belt clip. Includes barrel-lock lanyard and 1-inches split ring. This retractable instrument tether secures your instrument, preventing loss and damage while allowing easy extension. Designed for heavy instruments. RT3 Series with two QC-II accessories included. Locking mechanism. Rotating belt clip mount attaches to pants or belts up to 2-inches. Rotates 360 degrees. 80 lbs breaking strength. Impact-resistance plastic case. Saltwater


FallTech 7368 Self-Tracking Rope Grab with Integral 3-Foot ClearPack Shock Absorbing Lanyard
By FallTech
In Stock
$63.90

mpn: 7368, ean: 0084298736803,

4.7 out of 5 stars with 95 reviews
Rugged rope grab features closed construction for economy and structural integrity. Single cam and roller design allows the grab to track easily and smoothly up and down the line. Also features a permanently attached 3' ClearPack shock-absorbing lanyard which dramatically reduces arrest forces.Tough alloy steel construction. Closed construction. Simple, highly durable and economical. Permanently attached 3-foot ClearPack shock-absorbing lanyard dramatically reduces arrest forces. Meets the


C5010 – 18” D-Ring Extender
By Malta Dynamics
In Stock
$34.79

ean: 0852492006486,

4.5 out of 5 stars with 86 reviews
The Malta Dynamics 18'' D-Ring Extender quickly and easily adds length to the back D-Ring of harnesses. This enables easier lanyard attachment while wearing your harness. The snap hook component of the 18'' D-Ring Extender attaches directly to the harness dorsal D-Ring. The 18'' D-Ring Extender becomes the new connection point to the harness. Simply connect your lanyard to the D-Ring on the extension and you're ready to go.Best Value of ANY Comparable Harness on the Market. No Other


Miller Stainless Steel Permanent Double D-Ring Roof Anchor, 310 lb. Capacity (RA40)
By Honeywell
In Stock
$30.54
$28.00
You Save: 8%

mpn: RA40/, ean: 0094718114951,

4.5 out of 5 stars with 55 reviews
Designed for residential and commercial use, Miller Stainless Steel Permanent Double D-Ring Roof Anchors are ideal for new construction or as a retrofit on roofs with asphalt, shake or tile roofing materials. The Double D anchor system provides 2 safe anchor points when securely installed on a wood roof peak (sub-surface) or vertical wall. Only the permanent D-ring anchors are exposed to ensure a safe surface for other roofs workers. Stainless steel body construction ensures strength, and the


Spidergard SPFSH-001S Forged Steel Snap Hook, ANSI Certified
By Spidergard
In Stock
$11.85

mpn: SPFSH-001S, ean: 0600292914063,

4.4 out of 5 stars with 133 reviews
ANSI Certified Z359.12-09 | CSA Z259.12-11 | EN 362:2004. Maximum Breaking Strength: 23KN. Forged Steel Snap Hook with 3/4'' Gate Opening.. Double Action / Self Locking Gate. Zinc plated for corrosion protection.


KwikSafety ANNEX | N-270G Aluminum Carabiner | Heavy Duty Yoke Screw Lock Gate | 23 kN Min. Breaking Load | CE & EN Certified | Multifunctional Climbing Camping Hiking Traveling Fall Protection Tool
By KwikSafety
In Stock
$24.99
$12.99
You Save: 48%

mpn: N-270G, ean: 0639738429168,

4.7 out of 5 stars with 11 reviews
Lock in, safe and secure with our Kwiksafety carabiners. Made with high-quality aluminum alloy, our carabiners ensure you won?t be sacrificing strength for a lightweight piece of equipment. Certified with the highest standard in climbing safety, you can rest easy on your adventures knowing we?ve got your back (assuming you don?t have a back that weighs over 5,000 lbs.). Pioneers in safety technology, we at KwikSafety engineer all of our products with the greatest quality at the highest value to



Viewing Page 3 of 5

View more products in Fall Protection.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - edmontoncsse.org. All Rights Reserved.